dnl Autoconfigure input file for fetchmail dnl Eric S. Raymond dnl dnl Process this file with autoconf to produce a configure script. dnl AC_INIT([fetchmail], [6.1.2]) AC_CONFIG_SRCDIR([fetchmail.h]) AC_CONFIG_HEADERS([config.h]) dnl We want these before the checks, so the checks can modify their values. test -z "$CFLAGS" && CFLAGS="-O" AC_SUBST(CFLAGS) test -z "$LDFLAGS" && LDFLAGS=AC_SUBST(LDFLAGS) PACKAGE=`sed -n '/PACKAGE *= *\(.*\)/s//\1/p' <$srcdir/Makefile.in` VERSION=`sed -n '/VERSION *= *\(.*\)/s//\1/p' <$srcdir/Makefile.in` AM_INIT_AUTOMAKE("$PACKAGE", "$VERSION") AC_CANONICAL_HOST AC_PROG_CC AC_PROG_INSTALL AC_PROG_CPP dnl Later checks need this. AC_PROG_CC_C_O AC_AIX AC_ISC_POSIX AC_MINIX AC_HEADER_STDC AC_TYPE_SIZE_T AC_TYPE_PID_T AC_TYPE_SIGNAL AC_CHECK_HEADERS(unistd.h termios.h termio.h sgtty.h stdarg.h alloca.h) AC_CHECK_HEADERS(sys/itimer.h fcntl.h sys/fcntl.h memory.h sys/wait.h sys/shm.h) AC_CHECK_HEADERS(arpa/inet.h arpa/nameser.h resolv.h net/socket.h sys/select.h) AC_C_CONST dnl getopt needs this. dnl do NOT use AM_PROG_LEX, builds without LEX are not supported properly AC_PROG_LEX AC_PROG_MAKE_SET AC_PROG_YACC AC_SUBST(CPFLAGS) AC_SUBST(CEFLAGS) AC_SUBST(LDEFLAGS) # Check for LynxOS special case: -lbsd needed (at least on 2.3.0) and -s # not working. if test `uname` = "LynxOS" then echo "Adding -lbsd to standard libraries" LIBS="$LIBS -lbsd" LDFLAGS="" echo "Prepending standard include path to gcc flags" CPFLAGS="-I/usr/include" fi # Check for FreeBSD special case: more libs needed if test `uname` = "FreeBSD" then echo "Adding -lmd -lkvm -lcom_err to standard libraries" LIBS="$LIBS -lmd -lkvm -lcom_err" fi # Check for Rhapsody special case: it doesn't like -s if test `uname` = "Rhapsody" then echo "Removing -s load flag" LDFLAGS=`echo $LDFLAGS | sed "s/-s //"` fi dnl i18n ALL_LINGUAS="ca cs da de el es fr gl ja pl pt_BR tr sk" AM_GNU_GETTEXT dnl end i18n # Under sysV68, socket and friends are provided by the C library. # -linet does not provide socket, but causes multiple definition # errors at link-time. It is thus better to only use the C library. # So don't add -linet to the link list unless it's necessary AC_CHECK_FUNC(socket, AC_MSG_RESULT(using libc's socket), AC_CHECK_LIB(socket,socket) AC_CHECK_LIB(inet,socket)) # The condition in this test copes with the presence of inet_addr in libc6. AC_CHECK_FUNC(inet_addr, AC_MSG_RESULT(using libc's inet_addr), AC_CHECK_LIB(nsl,inet_addr)) dnl Port hack for Interactive UNIX System V/386 Release 3.2 AC_CHECK_LIB(cposix, strchr, [EXTRADEFS="$EXTRADEFS -D_SYSV3" LIBS="$LIBS -lcposix"]) dnl Port hack for Sparc/NetBSD-1.5 AC_CHECK_LIB(intl, gettext, [LIBS="$LIBS -lintl"]) AC_CHECK_FUNC(strstr, AC_DEFINE(HAVE_STRSTR), [EXTRASRC="$EXTRASRC \$(srcdir)/strstr.c" EXTRAOBJ="$EXTRAOBJ strstr.o"]) AC_CHECK_FUNC(strcasecmp, AC_DEFINE(HAVE_STRCASECMP), [EXTRASRC="$EXTRASRC \$(srcdir)/strcasecmp.c" EXTRAOBJ="$EXTRAOBJ strcasecmp.o"]) AC_CHECK_FUNC(memmove, AC_DEFINE(HAVE_MEMMOVE), [EXTRASRC="$EXTRASRC \$(srcdir)/memmove.c" EXTRAOBJ="$EXTRAOBJ memmove.o"]) AC_CHECK_FUNC(MD5Init, AC_DEFINE(HAVE_MD5), [EXTRASRC="$EXTRASRC \$(srcdir)/md5c.c" EXTRAOBJ="$EXTRAOBJ md5c.o"]) AC_CHECK_FUNC(getopt_long, AC_DEFINE(HAVE_GETOPT_LONG), [EXTRASRC="$EXTRASRC \$(srcdir)/getopt.c \$(srcdir)/getopt1.c" EXTRAOBJ="$EXTRAOBJ getopt.o getopt1.o"]) AC_FUNC_VPRINTF AC_FUNC_ALLOCA if test -n "$ALLOCA" then EXTRASRC="$EXTRASRC \$(srcdir)/alloca.c" EXTRAOBJ="$EXTRAOBJ alloca.o" fi dnl AC_CHECK_FUNC calls that might hack the Makefile must precede dnl the following AC_SUBSTs AC_SUBST(EXTRADEFS) AC_SUBST(EXTRASRC) AC_SUBST(EXTRAOBJ) AC_CHECK_FUNCS(tcsetattr stty setsid geteuid seteuid gethostbyname \ res_search herror strrchr strerror setlinebuf syslog \ snprintf vprintf vsnprintf vsyslog \ atexit inet_aton strftime setrlimit socketpair sigprocmask sigaction \ getopt_long) # Under Red Hat 4.0 (and many other Linuxes) -lresolv is seriously flaky # and breaks gethostbyname(2). It's better to use the bind stuff in the C # library. So don't add -lresolv to the link list unless it's necessary # (It will be necessary when using GNU libc6). AC_CHECK_FUNC(res_search, AC_MSG_RESULT(using libc's resolver functions), AC_CHECK_LIB(resolv,res_search, [AC_DEFINE(HAVE_RES_SEARCH) AC_MSG_RESULT(found resolver functions in libresolv); LIBS="$LIBS -lresolv"], AC_MSG_RESULT(no resolver calls found))) dnl Check for libcrypt -- it may live in libc or libcrypt, as on IRIX AC_CHECK_FUNC(crypt, , AC_CHECK_LIB(crypt,crypt)) dnl Check for RSA refersence library in case we're using SSL AC_CHECK_LIB(rsaref, RSAPublicDecrypt) dnl AC_FUNC_SETVBUF_REVERSED dnl Check for usable void pointer type AC_MSG_CHECKING(use of void pointer type) AC_TRY_COMPILE([], [char *p; void *xmalloc(); p = (char *) xmalloc(1); ], [AC_DEFINE(HAVE_VOIDPOINTER) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no)) dnl Check for ANSI volatile AC_MSG_CHECKING(for ANSI volatile) AC_TRY_COMPILE([], [volatile int n;], [AC_DEFINE(HAVE_VOLATILE) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no)) dnl Check out the wait reality. We have to assume sys/wait.h is present. AC_CHECK_FUNCS(waitpid wait3) AC_MSG_CHECKING(for union wait); AC_TRY_LINK([#include #include ], [union wait status; int pid; pid = wait (&status); #ifdef WEXITSTATUS /* Some POSIXoid systems have both the new-style macros and the old union wait type, and they do not work together. If union wait conflicts with WEXITSTATUS et al, we don't want to use it at all. */ if (WEXITSTATUS (status) != 0) pid = -1; #endif #ifdef HAVE_WAITPID /* Make sure union wait works with waitpid. */ pid = waitpid (-1, &status, 0); #endif ], [AC_DEFINE(HAVE_UNION_WAIT) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no)) AC_MSG_CHECKING(sys_siglist declaration in signal.h or unistd.h) AC_TRY_LINK([#include /* NetBSD declares sys_siglist in . */ #ifdef HAVE_UNISTD_H #include #endif], [char *msg = *(sys_siglist + 1);], [AC_DEFINE(SYS_SIGLIST_DECLARED) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no)) # Find the right directory to put the root-mode PID file in for dir in "/var/run" "/etc" do if test -d $dir then break; fi done AC_MSG_RESULT(root-mode pid file will go in $dir) AC_DEFINE_UNQUOTED(PID_DIR, "$dir") # We may have a fallback MDA available in case the socket open to the # local SMTP listener fails. Best to use procmail for this, as we know # it won't try delivering through local SMTP and cause a mail loop. # Sendmail without the -t option to use the message headers will work too, # not just for sendmail itself but for workalikes like exim. # # Note1: A disadvantage of using procmail is that local alias expansion # according to /etc/aliases won't get done if we fall back. This doesn't # matter in single-drop mode. # # Note2: it would be a very bad idea to use any MDA that doesn't return # a refuse-to-deliver status on disk- or process-table-full # conditions; mail could get lost that way. Sendmail and all of the MDAs # like exim that might be lurking under a sendmail alias) do the right # thing in this circumstance. Matthias Andree warns that procmail does # not. # # Note3: Defalt value of fallback is now off. Matthias writes: # # 1. there is no way to predict when the fallback is used. With some MTAs # (such as those limiting load average), outer circumstances can cause # the fallback to kick in. # # 2. the fallback changes fetchmail behaviour in unpredictable ways. It's # not only about alias expansion, .forwards to special filters won't # work, mail may end up in a different place (users claim "mail loss" # for that). # # 3. The claim procmail did the right thing with its exit codes is plain # wrong. I've seen procmail exit with code 1 when it should have exited # with code 75, like, configuration errors. Procmail is a dangerous # beast and is best replaced by maildrop. # # 4. if multiple choices exist (like procmail and maildrop), fetchmail # cannot tell which one it should choose. Say, your MTA is configured # to use maildrop to deliver to user's mailboxes, if fetchmail then # chooses procmail, this is plain wrong. # AC_PATH_PROG(procmail, procmail, "", $PATH:/usr/sbin) AC_PATH_PROG(sendmail, sendmail, "", $PATH:/usr/sbin:/usr/lib) AC_PATH_PROG(maildrop, maildrop, "", $PATH:/usr/local/bin) ### use option --disable-fallback to disable fallback MDA ### use option --enable-fallback=procmail or ### --enable-fallback=sendmail to select AC_ARG_ENABLE(fallback, [ --enable-fallback=procmail enable procmail as fallback --enable-fallback=sendmail enable /usr/sbin/sendmail as fallback --enable-fallback=maildrop enable maildrop as fallback --enable-fallback=no disable fallback],,[enable_fallback=no]) case "$enable_fallback" in sendmail) if test -z "$sendmail" ; then AC_ERROR([Sendmail selected as fallback, but not found]) #not reached fi AC_DEFINE_UNQUOTED(FALLBACK_MDA, "$sendmail -i %T") echo "Will use $sendmail as fallback MDA." ;; procmail) if test -z "$procmail" ; then AC_ERROR([procmail selected as fallback, but not found]) #not reached fi AC_DEFINE_UNQUOTED(FALLBACK_MDA, "$procmail -d %T") echo "Will use $procmail as fallback MDA." ;; maildrop) if test -z "$maildrop" ; then AC_ERROR([maildrop selected as fallback, but not found]) #not reached fi AC_DEFINE_UNQUOTED(FALLBACK_MDA, "$maildrop -d %T") echo "Will use $maildrop as fallback MDA." ;; no|unset) echo "Will not use a fallback MDA" ;; auto|yes|set) if test -n "$sendmail" ; then AC_DEFINE_UNQUOTED(FALLBACK_MDA,"$sendmail -i %T") echo "Will use $sendmail as fallback MDA." else echo "No fallback MDA available. procmail and maildrop are not eligible" echo "for automatic fallback MDA configuration for reliability reasons." fi ;; *) AC_ERROR([unkown value for --enable-fallback given: $enable_fallback]) #notreached ;; esac AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) ### use option --enable-POP2 to compile in the POP2 support AC_ARG_ENABLE(POP2, [ --enable-POP2 compile in POP2 protocol support (obsolete)], [with_POP2=$enableval], [with_POP2=no]) test "$with_POP2" = "yes" && AC_DEFINE(POP2_ENABLE) ### use option --disable-POP3 to omit the POP3 support AC_ARG_ENABLE(POP3, [ --disable-POP3 don't compile in POP3 protocol support], [with_POP3=$enableval], [with_POP3=yes]) test "$with_POP3" = "yes" && AC_DEFINE(POP3_ENABLE) ### use option --disable-IMAP to omit the IMAP support AC_ARG_ENABLE(IMAP, [ --disable-IMAP don't compile in IMAP protocol support], [with_IMAP=$enableval], [with_IMAP=yes]) test "$with_IMAP" = "yes" && AC_DEFINE(IMAP_ENABLE) ### use option --disable-ETRN to omit the ETRN support AC_ARG_ENABLE(ETRN, [ --disable-ETRN don't compile in ETRN protocol support], [with_ETRN=$enableval], [with_ETRN=yes]) test "$with_ETRN" = "yes" && AC_DEFINE(ETRN_ENABLE) ### use option --disable-ODMR to omit the ODMR support AC_ARG_ENABLE(ODMR, [ --disable-ODMR don't compile in ODMR protocol support], [with_ODMR=$enableval], [with_ODMR=yes]) test "$with_ODMR" = "yes" && AC_DEFINE(ODMR_ENABLE) ### use option --enable-RPA to compile in the RPA support AC_ARG_ENABLE(RPA, [ --enable-RPA compile in RPA protocol support], [with_RPA=$enableval], [with_RPA=no]) test "$with_RPA" = "yes" && AC_DEFINE(RPA_ENABLE) ### use option --enable-NTLM to compile in the NTLM support AC_ARG_ENABLE(NTLM, [ --enable-NTLM compile in NTLM authentication support], [with_NTLM=$enableval], [with_NTLM=no]) test "$with_NTLM" = "yes" && AC_DEFINE(NTLM_ENABLE) ### use option --enable-SDPS to compile in the SDPS support AC_ARG_ENABLE(SDPS, [ --enable-SDPS compile in SDPS protocol support], [with_SDPS=$enableval], [with_SDPS=no]) test "$with_SDPS" = "yes" && AC_DEFINE(SDPS_ENABLE) ### use option --enable-opie to compile in the OPIE support AC_ARG_ENABLE(opie, [ --enable-opie support OTP through the OPIE library], [ AC_CHECK_HEADER(opie.h,, [echo 'configure: cannot find , which is required for OPIE support.'; exit 1]) AC_CHECK_LIB(opie,opiegenerator,, [echo 'configure: cannot find libopie, which is required for OPIE support.'; exit 1]) with_opie=$enableval], [with_opie=no]) test "$with_opie" = "yes" && AC_DEFINE(OPIE_ENABLE) AC_ARG_ENABLE(inet6, [ --enable-inet6 support IPv6 (requires the inet6-apps library)], [ AC_CHECK_FUNC(getaddrinfo, [with_inet6=yes], [ LDFLAGS="$LDFLAGS -L/usr/inet6/lib"; AC_CHECK_LIB(inet6, getaddrinfo, [with_inet6=yes LIBS="$LIBS -linet6"], [ echo 'configure: cannot find proper glibc version or libinet6,'; echo ' which is required for IPv6 support.'; exit 1]) ] )], [with_inet6=no]) test "$with_inet6" = "yes" && AC_DEFINE(INET6_ENABLE) AC_CHECK_FUNCS(inner_connect) AC_ARG_ENABLE(netsec, [ --enable-netsec support network security (requires inet6-apps library)], [ unset ac_cv_lib_inet6_net_security_strtorequest; AC_CHECK_LIB(inet6, net_security_strtorequest,, [ unset ac_cv_lib_inet6_net_security_strtorequest; LDFLAGS="$LDFLAGS -L/usr/inet6/lib"; AC_CHECK_LIB(inet6, net_security_strtorequest,, [ echo 'configure: cannot find net_security_strtorequest in libinet6, which is required'; echo ' for network security support. Either it does not exist, or it was'; echo ' not built with network security support enabled.'; exit 1]) ]) unset ac_cv_header_net_security_h; AC_CHECK_HEADER(net/security.h,, [ unset ac_cv_header_net_security_h; CPPFLAGS="$CPPFLAGS -I/usr/inet6/include"; CFLAGS="$CFLAGS -I/usr/inet6/include"; AC_CHECK_HEADER(net/security.h,, [ echo 'configure: cannot find , which is required'; echo ' for network security support.'; exit 1]) ]) ] [with_netsec=no]) test "$with_netsec" = "yes" && AC_DEFINE(NET_SECURITY) # This version of the Kerberos 4 and 5 options addresses the follwing issues: # # * Build correctly under Heimdal kerberos if it is compiled with db2 and # OpenSSL support (Debian's is) # * Build the kerberos.c stuff (KPOP) only for kerberosIV, to avoid breakage. # I don't know if this is 100% correct, but now at least IMAP and POP3 # behave the same way regarding kerberosV. # * Build without any fuss for both kerberosIV and V at the same time. # * Move all the kerberos header mess to kerberos.h, and #include that # in driver.c and kerberos.c. # # Tested using the Heimdal Kerberos V libs, Kungliga Tekniska Högskolan (the # Royal Institute of Technology in Stockholm, Sweden)'s kerberos IV libs, and # the MIT reference implementation of KerberosV (all as packaged in Debian). ### use option --with-kerberos5=DIR to point at a Kerberos 5 directory ### make sure --with-ssl is run before --with-kerberos* ! AC_ARG_WITH(kerberos5, [ --with-kerberos5=DIR point fetchmail compilation at a Kerberos 5 directory], [ if test "$with_kerberos5" != "no" then # Check for a OpenBSD special case if test "$with_kerberos5" = "yes" && ( test `uname` = "OpenBSD" ) then AC_CHECKING([kerberosV for OpenBSD]) AC_DEFINE(HEIMDAL) AC_DEFINE(KERBEROS_V5) CEFLAGS="$CEFLAGS -I/usr/include/kerberosV" LIBS="$LIBS -lasn1 -lkrb5 -lcom_err -lkafs" else if test "$with_kerberos5" != "yes" then LDEFLAGS="$LDEFLAGS -L${with_kerberos5}/lib" searchdirs="$with_kerberos5" else searchdirs="/usr/kerberos /usr/local/krb5 /usr/athena /usr" fi with_kerberos5= for dir in $searchdirs do AC_MSG_CHECKING([for Kerberos V in $dir]) if test -f "$dir/include/krb5.h" then ac_krblibs= if test -f "$dir/include/roken.h" then ac_krblibs="-lasn1 -lroken -lcom_err" AC_MSG_RESULT([Heimdal found]) dnl Attempt to detect if we need to -ldb2 to link Heimdal dnl we assume we do if it is available AC_CHECK_LIB(db2, db_open, ac_krblibs="$ac_krblibs -ldb2", [], ${LDEFLAGS}) AC_CHECK_LIB(des, des_string_to_key, libk5crypto=-ldes, AC_CHECK_LIB(ssl, MD5_Init, [], AC_ERROR([DES libraries not found. Try adding --with-ssl to enable OpenSSL support]), ${LDEFLAGS} ${ac_krblibs}), ${LDEFLAGS} ${ac_krblibs}) AC_DEFINE(HEIMDAL) else AC_MSG_RESULT([found]) ac_krblibs="-lcom_err" AC_CHECK_LIB(crypto, krb5_des_string_to_key, libk5crypto=-lcrypto, AC_CHECK_LIB(k5crypto, krb5_des_string_to_key, libk5crypto=-lk5crypto, AC_ERROR([Kerberos 5 DES libraries not found]), ${LDEFLAGS} ${ac_krblibs}), ${LDEFLAGS} ${ac_krblibs}) fi AC_CHECK_LIB(krb5, krb5_init_context,[], continue, ${LDEFLAGS} ${ac_krblibs}) AC_DEFINE(KERBEROS_V5) test "$dir" != "/usr" && CEFLAGS="$CEFLAGS -I$dir/include" LDEFLAGS="$LDEFLAGS -L$dir/lib" LIBS="$LIBS $ac_krblibs $libk5crypto" with_kerberos5=$dir break else AC_MSG_RESULT([not found]) fi done if test -z "$with_kerberos5" ; then AC_ERROR([Kerberos 5 libraries not found]) fi fi fi ]) dnl --with-kerberos5=DIR ### use option --with-kerberos=DIR to point at a Kerberos 4 directory AC_ARG_WITH(kerberos, [ --with-kerberos=DIR point fetchmail compilation at a Kerberos 4 directory], [ if test "$with_kerberos" != "no" then # Check for a NetBSD/OpenBSD special case if test "$with_kerberos" = "yes" && ( test `uname` = "NetBSD" || test `uname` = "OpenBSD" ) then AC_CHECKING([kerberosIV for `uname`]) AC_DEFINE(KERBEROS_V4) CEFLAGS="$CEFLAGS -I/usr/include/kerberosIV" LIBS="$LIBS -lkrb -ldes" else #we need to detect when we're building under a kerberosV compatibility #layer, btw... if test "$with_kerberos" != "yes" ; then searchdirs="$with_kerberos" else searchdirs="$with_kerberos5 /usr/kerberos /usr/kerberosIV /usr/athena/usr" fi with_kerberos= ac_saveLDFLAGS="$LDFLAGS" for dir in $searchdirs do AC_MSG_CHECKING([for Kerberos IV in $dir]) if test -f "$dir/include/krb.h" || test -f "$dir/include/krb4.h" \ || test -f "$dir/include/kerberosIV/krb.h" then AC_MSG_RESULT([found]) else AC_MSG_RESULT([not found]) continue fi #Find libs if test -f "$with_kerberos5/roken.h" ; then AC_CHECK_LIB(45, krb_mk_req) fi LDFLAGS="-L$dir/lib $ac_saveLDFLAGS" AC_SEARCH_LIBS(des_string_to_key, [des425 des], [], continue) AC_SEARCH_LIBS(krb_realmofhost, [krb4 krb], [], continue) with_kerberos="$dir" if test -f "$dir/include/kerberosIV/krb.h" ; then dir="$dir/include/kerberosIV" else dir="$dir/include" fi AC_DEFINE(KERBEROS_V4) test -f "$with_kerberos5/roken.h" && AC_DEFINE(HEIMDAL) test "$dir" != "/usr/include" && CEFLAGS="$CEFLAGS -I$dir" LDEFLAGS="$LDEFLAGS -L$with_kerberos/lib" break done if test -z "$with_kerberos" ; then AC_ERROR([Kerberos 4 libraries not found]) fi LDFLAGS="$ac_saveLDFLAGS" fi fi ]) dnl --with-kerberos=DIR ### use option --with-ssl to compile in the SSL support AC_ARG_WITH(ssl, [ --with-ssl=[DIR] enable SSL support using libraries in DIR], [with_ssl=$withval], [with_ssl=no]) test "$with_ssl" != "no" && AC_DEFINE(SSL_ENABLE) if test "$with_ssl" = "yes" then # He didn't specify an SSL location. Let's look at some common # directories where SSL has been found in the past and try and auto # configure for SSL. OpenSSL determination will be made later. # This will screw up if an OpenSSL install is located in a later # directory than an older SSLeay install, but the user should fix that # anyways and he can override on the configure line. for ac_dir in \ /usr/local/ssl \ /usr/ssl \ /usr \ /local/ssl \ /opt/ssl \ ; \ do if test -d "$ac_dir" ; then with_ssl=$ac_dir break; fi done fi if test -n "$with_ssl" -a "$with_ssl" != "no" then # With the autoconfigure above, the only time this is going to be # true is going to be when we could not find the headers. If they # are not in system standard locations, we are going to be broken. if test "$with_ssl" = "yes" then # Let's just define the standard location for the SSLeay root with_ssl="/usr/local/ssl" fi if test -r $with_ssl/include/openssl/ssl.h then ### ssl.h found under openssl. Use openssl configuration preferentially, ### In Red Hat 9, this file includes a reference to , so we ### force the Kerberos direcory onto the include path so it will build. echo "Enabling OpenSSL support in $with_ssl" CEFLAGS="$CEFLAGS -I$with_ssl/include -I/usr/kerberos/include" ### OpenBSD comes with ssl headers elif test -r /usr/include/ssl/ssl.h then echo "Enabling SSLeay support in $with_ssl" CEFLAGS="$CEFLAGS -I/usr/include/ssl" else echo "Enabling SSLeay support in $with_ssl" test "$with_ssl" != "/usr" && CEFLAGS="$CEFLAGS -I$with_ssl/include" fi LDEFLAGS="$LDEFLAGS -L$with_ssl/lib" LIBS="$LIBS -lssl -lcrypto" AC_DEFINE(SSL_ENABLE) else echo 'Disabling SSL support...' fi ### use option --with-socks=DIR to point at SOCKS library AC_ARG_WITH(socks, [ --with-socks[=DIR] add built-in SOCKS firewall access], [ if test "$with_socks" != no then if test "$with_socks" != yes then LDEFLAGS="$LDEFLAGS -L$with_socks" else AC_CHECK_LIB(socks, Rconnect,, AC_MSG_ERROR([could not find libsocks which is needed for built-in SOCKS support])) fi AC_DEFINE(HAVE_SOCKS) CEFLAGS="$CEFLAGS -Dconnect=Rconnect -Dgetsockname=Rgetsockname -Dbind=Rbind -Daccept=Raccept -Dlisten=Rlisten -Dselect=Rselect" LIBS="-lsocks $LIBS" fi]) ### use option --with-socks5=DIR to point at SOCKS library AC_ARG_WITH(socks5, [ --with-socks5[=DIR] add built-in SOCKS5 firewall access], [ if test "$with_socks5" != no then if test "$with_socks5" != yes then LDEFLAGS="$LDEFLAGS -L$with_socks5" fi ac_savedLDFLAGS="$LDFLAGS" LDFLAGS="$LDEFLAGS $LDFLAGS" AC_CHECK_LIB(socks5, SOCKSconnect,, AC_MSG_ERROR([could not find libsocks5 which is needed for built-in SOCKS5 support])) AC_DEFINE(HAVE_SOCKS) CEFLAGS="$CEFLAGS -Dconnect=SOCKSconnect -Dgetsockname=SOCKSgetsockname -Dbind=SOCKSbind -Daccept=SOCKSaccept -Dlisten=SOCKSlisten -Dselect=SOCKSselect -Drecvfrom=SOCKSrecvfrom -Dsendto=SOCKSsendto -Drecv=SOCKSrecv -Dsend=SOCKSsend -Dread=SOCKSread -Dwrite=SOCKSwrite -Drresvport=SOCKSrresvport -Dshutdown=SOCKSshutdown -Dlisten=SOCKSlisten -Dclose=SOCKSclose -Ddup=SOCKSdup -Ddup2=SOCKSdup2 -Dgethostbyname=SOCKSgethostbyname" AC_CHECK_FUNC(SOCKSfclose, [CFLAGS="$CFLAGS -Dfclose=SOCKSfclose"]) LDFLAGS="$ac_savedLDFLAGS" fi]) ### use option --with-hesiod=DIR to point at a HESIOD directory AC_ARG_WITH(hesiod, [ --with-hesiod=DIR point fetchmail compilation at a HESIOD directory]) case "x$with_hesiod" in xno) ;; x) for dir in /usr/athena /usr /usr/local do if test -f "$dir/include/hesiod.h" then CEFLAGS="$CEFLAGS -DHESIOD" test "$dir" != "/usr" && CEFLAGS="$CEFLAGS -I$dir/include" LDEFLAGS="$LDEFLAGS -L$dir/lib" LIBS="$LIBS -lhesiod" with_hesiod=$dir break fi done ;; *) # Path given CEFLAGS="$CEFLAGS -DHESIOD" test "$with_hesiod" != "/usr" && CEFLAGS="$CEFLAGS -I$with_hesiod/include" LDEFLAGS="$LDEFLAGS -L$with_hesiod/lib" LIBS="$LIBS -lhesiod" ;; esac ### use option --with-gssapi=DIR to compile in GSSAPI support AC_ARG_WITH(gssapi, [ --with-gssapi[=DIR] compile in GSSAPI support using libraries in DIR], [ if test "$with_gssapi" != "no" then if test "$with_gssapi" = "yes" -a -n "$with_kerberos5" then with_gssapi=$with_kerberos5 fi if test "$with_gssapi" != "yes" -a -n "$with_gssapi" then CFLAGS="$CFLAGS -I$with_gssapi/include" LDFLAGS="$LDFLAGS -L$with_gssapi/lib" fi if test -f "$with_gssapi/include/roken.h" then LIBS="$LIBS -lkrb5 -lasn1 -ldes -lroken -ldb -ldl" AC_CHECK_LIB(gssapi, gss_init_sec_context,LIBS="$LIBS -lgssapi", AC_MSG_ERROR([could not find libgssapi which is needed for GSSAPI support]), ) AC_DEFINE(HEIMDAL) else AC_CHECK_LIB(gssapi_krb5, gss_init_sec_context,LIBS="$LIBS -lgssapi_krb5", AC_MSG_ERROR([could not find libgssapi_krb5 which is needed for GSSAPI support]), -lkrb5) fi AC_DEFINE(GSSAPI) save_CPPFLAGS=$CPPFLAGS CPPFLAGS="-I$with_gssapi/include" AC_CHECK_HEADERS(gssapi.h gssapi/gssapi.h gssapi/gssapi_generic.h) if test "$ac_cv_header_gssapi_h" = "yes"; then AC_EGREP_HEADER(GSS_C_NT_HOSTBASED_SERVICE, gssapi.h, AC_DEFINE(HAVE_GSS_C_NT_HOSTBASED_SERVICE)) else AC_EGREP_HEADER(GSS_C_NT_HOSTBASED_SERVICE, gssapi/gssapi.h, AC_DEFINE(HAVE_GSS_C_NT_HOSTBASED_SERVICE)) fi fi]) AC_CONFIG_FILES([Makefile intl/Makefile po/Makefile.in]) AC_CONFIG_COMMANDS([default],[ # The reason for this odd makedepend line is that we want # to have all dependencies evaluated relative to the source directory # and let VPATH do all the dirty work when we build remotely echo "You can ignore any makedepend error messages:"; echo timestamp > stamp-h; (cd $srcdir; makedepend -f - *.c) >>Makefile]) AC_OUTPUT dnl Local Variables: dnl comment-start: "dnl " dnl comment-end: "" dnl comment-start-skip: "\\bdnl\\b\\s *" dnl compile-command: "make configure config.h.in" dnl End: